Divide and Conquer: How to Create Two Spaces Out of One Using Plasterboard
Have you ever needed more space in your home but could not find the room? In this case, you may consider dividing a large room into two distinct areas using plasterboard. After all, it's a great solution for creating a workspace, study area, or even carving out space for an extra bedroom. But is this something you should tackle yourself, and how should you go about it?
Step 1: Prepare Your Room
Before you can start on the actual task of installing your plasterboard, you'll need to prepare the area. Start by removing any furniture that may be in the way and then give the walls a good clean. Once this is done, measure the length of each wall so that you can calculate how many boards will be needed for each wall.
Step 2: Install the Frames
Next, it's time to install your frames. These will form the foundation onto which you will attach your plasterboard panels. Measure carefully as you install your frames so that they are level and parallel with each other across all walls. Make sure to double-check your measurements before drilling any holes. It is also important that the frames are securely fastened together with screws and bolts at their joints in order to ensure stability.
Step 3: Attach Your Panels
Now that your frames are in place, it's time to fit your plasterboard panels. Cut them down to size being particularly careful to get everything right. Then use screws or nails to secure them into place along the top edge of each frame. You may also need some special adhesive or sealant for this process. Make sure to check with your local hardware store or DIY centre for advice on what products would be best suited for this job. Finally, fill in any gaps around the edges with a jointing compound or filler before sanding everything down for a smooth finish.
How to Proceed
If you have a lot of patience and a keen eye for detail, you may be able to do this job yourself. However, don't underestimate the scale of the task and the potential disruption it could cause if you run into any delays. In many instances, it is best to outsource this type of work to a professional contractor. They'll have access to the proper tools and equipment, know any handy shortcuts and will be sure to clean everything up nicely before they leave.
For more information on plasterboard like gyprock plasterboard, contact a professional near you.